|
|
|
|
|
|
| Introduction |
|
- The world’s first USB-type wireless portable gateway that combines a Wireless Router, Access Point (AP) and
Wireless LAN Adapter all in one! |
|
- All these three functions allow the user to truly experience wireless freedom, as well as the convenience of
portability. |
|
| - Since it is as small as a regular thumb drive, users can virtually carry it around anywhere with them. |
|
| - It can conveniently be plugged right into your PC, PDA, or laptop’s USB port |
|
| 3-in-1 Wireless Broadband Router |
|
| 1. Wireless Broadband Router |
| Windy31 is highly portable and user-friendly, allowing the host to easily. connect other Wi-Fi devices around such as laptops, PDAs, and Wi-Fi phones to the internet without complication of wires. |
|
| 2. Wireless LAN Adapter |
| Windy31 can conveniently be inserted into a USB port of a computer. With Windy 31, you can enjoy the wireless internet service provided by any public places, such as cafe, library, office, school, airport and etc. |
|
| 3. Wireless Access Point (WAP) |
| Windy 31 can wirelessly network up to 32 different clients together by being plugged into single host computer. Manage all your local networks, easily share documents, and best of all, go wireless! |
|
 |
|
| Characteristics of WINDY31 |
|
- Auto-installation without a CD
- Easy mode-changing from LAN/AP/Router
- Convenient User-Interface
- Windows Vista Compatible! |
|
| Windy31 typical Configuration (at Home or Office) |
 |
|
|
|
| Scenario I |
|
| If you want to access the internet in a public area such as a seminar,
trade show, library, hotel, or airport:
td>
|
| - Current Limitations: Only a wireless internet service subscriber can use the internet |
| - Windy31 : Plug the Windy31 into any computer that is connected to the
internet, and you can use the internet service through your laptop
|
|
| Scenario II |
|
| If you want to share your internet connection with friends or co-
workers without paying for each additional connection provided at
airport, hotel, conference room, trade show, etc.
|
| - Current Limitations : Each user has to pay separately and subscribe to the internet service |
| - Windy31 : Plug the Windy31 into a single subscriber’s computer and share the
connection with friends and co-workers at no additional cost.
|
|
|
|
| Features and configuration |
|
| Features |
|
| Convenient to use anywhere and anytime |
- Portable, slim and compact design to fit in one hand (USB memory stick size)
- The only thing required is internet connected computer, easy and fast internet connection sharing
|
|
| Fast installation and easy setting |
- Connect Windy31 into computer for auto installation of driver and utility programs
(Separate installation CD and driver not necessary)
- Easy GUI-type setting screen
|
|
| Speed |
| - Support Wireless 802.11b(11Mbps) speed /
802.11g(54Mbps) speed /
802.11n(Max.150Mbps) speed
|
|
| Security |
| - Access control with WEP(64,128 bit) / WPA-PSK / WPA2-PSK(ASE) and MAC address |
|
|
|
| Configuration |
|
| Please check Windy31 product configurations as shown below.
Please contact the seller you purchased from immediately if contents
of product is damaged or missing.
|
|
 |
|
|
|
| Product Description |
|
 |
| td>
|
|
|
| Installation Requirements |
|
Before installing Windy31, Please check whether your computer configuration matches
the requirements shown below.
|
|
- Intel Pentium IV or above
- 512M bytes system memory or above
- Windows XP/VISTA/7 Operating Systems ( Support auto-installation for Windows XP or above)
- USB 1.1 or USB 2.0
- Requires more than 30M bytes of usable hard disk space
|
|
|
|
|
|
| Structure Diagram of Windy31 |
|
 |
|
| Checklist before installing
|
|
- Please be sure that Windy31 must be inserted to a computer which is connected to Internet.
- Computer to be installed with Windy31 must have more than one LAN Adapter.
- Please check your computer for Virus and Spyware, before installation. Some Viruses and Spywares may interfere with automatic installation of Widny31 driver and utility programs
|
|
|
|
| Windows VISTA |
|
| Installing Windy31 |
|
| Checklist before installing |
| Computer to be installed with Windy31 must have more than one LAN Adapter. Computer to be installed with Windy31 must have Internet connection. |
|
| Installation |
|
| 1) Insert Windy31 into USB port of Laptop or Desktop PC and program will automatically run as shown below |
|
 |
|
| 2) After program installation, the following screen will appear one after another in the right-side of Windows Task bar, showing that the USB device acknowledges and is installing Windy31. |
|
 |
|
During installation, Windows Security Alert may display “Keep blocking” &
“Unblock” pop-up for security reasons, please select the button “unblock”.
(If you select “keep blocking”, there will be no network connection.) |
|
 |
|
3) Please wait until “Windy31 Gateway Manager” window appears, “Windy31 setting in-progress" and
"setting complete" windows are displayed as shown below.
This process will take some minutes as it is installing the Windy31 Gateway.
(Installation time may differ according to computer configuration)
|
|
 |
|
| 4) After “Program has been successfully installed“ appears, click “OK”. Then, Windy31 has completed installation. |
|
 |
|
| Connection method may differ according to Wireless LAN device, please refer to Wireless LAN usage method. (For wireless device usage method, please refer to wireless device product manual or please contact the provider.)
|
|
|
|
| Configuring Windy31 Gateway Manager |
|
| Screen provided below is Windy31 Gateway Manager Setting. |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
 |
|
① SSID : Name to be used for wireless (Default is Windy31-XX)
② Channel : Assign wireless channel, automatically
③ Use Mac Address : Assign SSID as MAC address
④ Security Setting : Assign wireless security settings (Please refer to the Installation guide for more details)
⑤ Wireless LAN connection list : List of wireless device's MAC address connected to Windy31.
⑥ Bridge adapter : Allows Internet-connected network card change
⑦ Switch to LAN Card Mode : Button to use Windy31 as LAN Adapter (In LAN Adapter mode, Windy31 Gateway
functions cannot be used) |
|
| Internet access by other users can be controlled in “Access Control” menu of Windy31 Gateway below. |
|
 |
|
① Disable : Disable Access Policy.
② Allow All : All the Mac addresses listed in the table have access to the internet.
③ Reject All : All the Mac addresses listed in the table cannot access to the internet. |
|
| Software upgrade |
|
 |
|
| Click “Auto Update”, to confirm that you are using the latest software. If you are currently using an old software, the software update will appear. |
|
|
|
| Configuring Wireless LAN Adapter |
|
| How to configure PC setting for using Windy31 as Wireless LAN Adapter |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
| Wireless LAN connection |
|
 |
|
① Select AP as connection mode from AP list
② Add to Profile : Add the selected AP to Profile
③ Profile : Menu to connect to AP using Added Profile
④ Rescan : Scan Wireless AP
⑤ Switch to Gateway mode : Switch to Windy31 mode Wireless Router |
|
| Wireless LAN connection |
|
 |
|
① Select AP to connect
② Activate : Connect to the selected AP with wireless (Must click “Activate” button for using wireless Service)
③ Add : Add the Profile
④ Delete : Delete the Profile or disconnect wireless connection
⑤ Edit : Modify profile configuration |
|
| Specific wireless connection status is shown under "Link Status" tab |
|
 |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
|
|
| Windows XP |
|
| Installing Windy31 |
|
| Checklist before installing |
| Computer to be installed with Windy31 must have more than one LAN Adapter. Computer to be installed with Windy31 must have Internet connection. |
|
| Installation |
| Please check your computer for Virus and Spyware, before installation. Some Viruses and Spywares may interfere with automatic installation of Widny31 driver and utility programs |
|
| 1) Insert Windy31 into USB port of Laptop or Desktop PC and program will automatically run as shown below. |
|
 |
|
| 2) After program installation, the following screen will appear one after another in the right-side of Windows Task bar, showing that the USB device acknowledges and is installing Windy31. |
|
 |
|
| During installation, Windows Security Alert may display “Keep blocking” & “Unblock” pop-up for security, please select the button “unblock”. (If you select “keep blocking” blocked, then there will be no network connection.)
|
|
 |
|
| 3) Please wait until “Windy31 Gateway Manager” window appears, “Windy31 setting in-progress" and "setting complete" windows are displayed as shown below.
This process will take some minutes as it is installing the Windy31 Gateway.
(Installation time may differ according to computer configuration)
|
|
 |
|
| 4) After “Program has been successfully installed“ appears, click “OK”.
Then, Windy31 has completed installation.
|
|
 |
|
| - Wireless LAN connection program(WLAN Autoconfig) is embedded in Windows VISTA.
- If wireless service is disabled, wireless LAN cannot be used.
- Please refer to Windows VISTA user manual for further information on wireless LAN Autoconfig.
|
|
|
|
| Configuring Windy31 Gateway Manager |
|
| Screen shown below is Windy31 Gateway Manager Setting. |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
 |
|
① SSID : Name to be used in wireless (Default is Windy31-XX)
② Wireless mode : Assign wireless LAN mode (802.11b=11Mbps/802.11g=54Mbps)
③ Use Mac address : Assign SSID as MAC address .
④ Security Settings : Assign wireless security settings (Please refer to the installation guide for more details)
⑤ Transmission rate : Designate transmission rate.
⑥ Channel : Assign wireless channel, automatically.
⑦ Area (Country code) :Assign channel range used by each country.
⑧ Wireless LAN connection list : List of wireless device's MAC address connected to Windy31.
⑨ Bridge adapter : Allow Internet-connected network card change
⑩ Switch to LAN card mode : Button to use Windy31 as LAN Adapter. (In LAN Adapter mode, Windy31 Gateway functions cannot be used) |
|
| Internet access by other users can be controlled in “Access Control” menu of Windy31 Gateway below. |
|
 |
|
① Disable : Disable Access Policy.
② Allow All : All the Mac addresses access to the internet listed in the table can be accessed to the internet.
③ Reject All : All the Mac addresses listed in the table can not be accessed to the internet. |
|
| Software upgrade |
|
 |
|
| Click “Auto Update”, to confirm that you are using the latest software. If you are currently using an old software, the software update will appear. |
|
|
|
| Configuring Wireless LAN Adapter |
|
| How to configure PC setting for using Windy31 as Wireless LAN Adapter |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
| Wireless LAN connection |
|
 |
|
① Select AP as connection mode from AP list
② Rescan : Scan Wireless AP
③ Connect : Connect to selected AP with wireless
④ Add to Profile : Add the selected AP to Profile
⑤ Switch to Gateway mode : Switch to Windy31 Wireless Router mode |
|
 |
|
① Select AP to connect
② Add : Add to profile.
③ Delete : Delete Profile or disconnect wireless connection
④ Edit : Modify profile configuration
⑤ Activate : connect to the selected AP with wireless
(Must click “Activate” button for using wireless service) |
|
| Specific wireless connection status is shown under "Link Status" tab |
|
 |
|
| For more information, Please refer to our website [www.synetusa.com] |
|
|
| Windows 7 |
|
| Installation
|
|
1. Insert Windy31 into USB port of Laptop or Desktop PC and program will
automatically run as shown below.
|
|
2. After program installation, the following screen will be shown one after another in the right-side of Windows Task bar, showing that the USB device acknowledges and is
installing Windy31.
|
|
| During installation, Windows Security Alert may display “Keep blocking” & “Unlock” pop-up for security, please select the button “Unlock”. (If you select “Keep blocking” blocked, then there will be no network connection.) |
|
| 3. Please wait until “Windy31 Gateway Manager” window appears, “Windy31 setting in-progress" and "setting complete" windows are displayed as shown below. This process will take some minutes as it is installing the Windy31 Gateway.(Installation time may differ according to computer configuration)
|
|
| 4. After “Program has been successfully installed“ appears, click “OK”. Then, Windy31 has completed installation. |
|
| Connection method may differ according to Wireless LAN device, please refer to Wireless LAN usage method. (For wireless device usage method, please refer to wireless device product manual or please contact the provider.) |
|
|
 |
|
| 4. You will see the all application list
|
|
| 5. Right click? on first application > properties |
|
 |
|
| Choose Window Vista ( Service Pack 2 ) and Apply |
|
 |
|
| Apply to all application on the list
|
| |
|
|
| Configuring Windy31 Gateway Manager |
|
| Screen shown below is Windy31 Gateway Manager Setting. |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
|
|
① SSID : Name to be used in wireless(Default is Windy31-XX)
② MCS: Assign 11n data transmission speed
③ Channel : Assign wireless channel, automatically.
④ Wireless Mode: Assign wireless LAN mode (802.11b=11Mbps/802.11g=54Mbps)
⑤ Use Mac address : Assign SSID as MAC address.
⑥ Security Settings : Assign wireless security settings
(Please refer to the installation guide for more details)
⑦ Area(Country code) : Assign channel range used by each countries.
⑧ Wireless LAN connection list : List of wireless device's MAC address connected to Windy31.
⑨ Bridge adapter : Allow Internet-connected network card change
⑩ Switch to LAN card mode : Button to use Windy31 as LAN Adapter.
(In LAN Adapter mode, Windy31 Gateway functions cannot be used)
|
|
| Internet access by other users can be controlled in “Access Control” menu of Windy31 Gateway below. |
|
|
|
① Disable : Disable Access Policy.
② Allow All : All the Mac addresses access to the internet listed in the table can be
accessed to the internet.
③ Reject All : All the Mac addresses listed in the table can not be accessed to the internet.
|
|
| Software upgrade |
|
|
|
| Click “Auto Update”, to confirm that you are using the latest software. If you are currently using the old software, the software update will be appeared.
|
|
|
|
| Configuring Wireless LAN Adapter |
|
| How to configure PC setting for using Windy31 as Wireless LAN Adapter |
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
| Wireless LAN connection |
|
|
|
① Select AP as connection mode from AP list
② Rescan : Scan Wireless AP
③ Connect : Connect to selected AP with wireless
④ Add to Profile : Add the selected AP to Profile
⑤ Switch to Gateway mode : Switch to Windy31 Wireless Router mode |
|
|
|
① Select AP to connect
② Add : Add to profile.
③ Delete : Delete Profile or disconnect wireless connection
④ Edit : Modify profile configuration
⑤ Activate : connect to the selected AP with wireless
(Must click “Activate” button for using wireless service) |
|
| Specific wireless connection status is shown under "Link Status" tab |
|
|
|
| For more information, Please refer to our website [www.windy31n.com]
|
|
|
|
| Optional Configuration |
|
| Wireless LAN connection in Windows VISTA/7
|
|
| To use wireless LAN service, Wireless LAN Adapter must be installed in your computer. |
- Wireless LAN connection program(WLAN Autoconfig) is embedded in Windows VISTA.
- If wireless service is disabled, wireless LAN cannot be used.
- Please refer to Windows VISTA user manual for further information on wireless LAN Autoconfig.
|
|
| Please refer to the product manual of Wireless LAN Adapter purchased or contact Wireless LAN Adapter manufacturers/sales representatives for installing user's wireless LAN Adapter or application program.
|
|
| Optional Connection |
|
 |
|
 |
|
 |
|
 |
|
 |
- "Successfully connected to Windy31-xx." message appears and check box “Save this network” saved then,
click "Close" button to complete wireless network connection.
|
|
 |
- "Successfully connected to Windy31-xx." message appears and check box “Save this network” saved then,
click "Close" button to complete wireless network connection.
|
|
 |
| - Confirm whether service has begun properly after the selection of
"WLAN Autoconfig" in services (Local).
|
|
 |
|
|
|
| Wireless LAN connection in Windows XP |
|
| To use Wireless LAN Service, Wireless LAN adapter muse be installed at your computer. |
- Wireless LAN connection program (Zero Configuration) is embedded in Windows XP, but Windows 98/ME/2000
do not support wireless connection program
- To use wireless LAN service in Windows 98/ME/2000, please use wireless connection program provided by
wireless LAN adapter manufacturers |
|
| Please refer to the manual of Wireless LAN Adapter that you have purchased and contact your wireless LAN Adapter suppliers or manufacturers regarding installation of wireless LAN adapter in your PC. |
|
| Optional Connectionfont> |
|
 |
|
 |
|
 |
|
 |
|
- If encryption function is active in Wireless AP(Windy31-xx), Network key (password) will be asked when
connected. |
|
 |
|
| - If connection is established, then the message indicating 'connected' will be displayed on the right-side of SSID. |
|
 |
|
| Wireless network properties in Windows XP may display different configuration screens according to patch versions of Windows OS. |
|
| If the error message “Limited or no connectivity” appears, then directly input IP address. (note : go to next page) |
|
 |
|
|
|
| Inputting IP Address Manually |
|
 |
| - Select Wireless Network Connection, click right-side of mouse to select properties.
|
|
| In Internet Protocol(TCP/IP) Properties, select ”Use the following IP Address(S)”, then directly input IP address.
|
|
- IP Address : IP address which used in Windy31, is in between the following IP range 192.168.33.2 to 192.168.33.254.
- Subnet Mask : Windy31 uses C-class by default.(255.255.255.0)
- Default gateway : Windy31 uses Default gateway.(192.168.33.1) |
|
 |
|
| DNS server for each network |
|
Bellsouth Fast access DSL: Georgia, USA (DNS: 205.152.37.23)
Comcast (pick the nearest!) USA: Comcast (national) Primary (DNS: 68.87.66.196)
ORSC Public Access DNS Name servers: (DNS: 204.57.55.100)
Speakeasy (pick any two!) USA: Washington state and Oregon (DNS: 66.93.87.2) |
|
|
|
| Troubleshooting |
 |
|
 |
| |
 |
| |
 |
| |
 |
|
|
